Song Y., Sborchia C., Smith K., Wu W., Zhang Z., Wu H., Lu K., Shen G., Wei J., Du S., Readman P., Valente P., Penate J.
Ключевые слова: ITER, coils poloidal field, cryogenic systems, mechanical properties, fatigue behavior, test results
Ключевые слова: Tokamak, China, design, status, magnetic systems, coils toroidal, design parameters, central coils, coils poloidal field, hybrid systems, Bi2212, HTS
Ключевые слова: bus bar conductor, mechanical properties, tensile tests, laminations, test results, densification, insulating medium
Jiang B., Song Y., Wang C., Sborchia C., Smith K., Wu W., Zhang Z., Wu H., Lu K., Shen G., Wei J., Readman P., Valente P., Vercelli G., Bilbao M., Penate J.C.
Ключевые слова: magnets, insulation coating, tapes, fabrication, sol gel process, microstructure, porosity, dielectric properties, new
Mitchell N., Kim H., Ilyin Y., Chen L., Chen Y., Devred A., Clayton N., Gung C., Ding K., Lu K., Beemsterboer C., Farek J., Wen X., Man S., Naoyuki S.
Ключевые слова: bus bar conductor, ITER, joints, design, test results, feeder, heat loads, pressure drop
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Huang X., Liu C., Ding K., Lu K., Feng H., Niu E., Du Q., Vergara A., Zhu S*1., Fernandez-Hernando L.
Ключевые слова: ITER, correction coils, current leads, HTS, Bi2223, prototype, fabrication, joint resistances, overheating, pulsed current, test results
Ключевые слова: ITER, magnetic systems, feeder, prototype, fabrication, test results, cooling technology
Ключевые слова: measurement setup, cryogenic systems, test results, ITER, current leads, HTS, control systems, new, facility
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Liu C., Ding K., Lu K., Niu E., Ran Q.
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, fabrication, test results, prototype, LTS, NbTi, cable-in-conduit conductor, joints, solder, heat exchanger
Ключевые слова: HTS, Bi2223/Ag alloy, tapes, stacked blocks, joints, current leads, design, design parameters, fabrication, heat exchanger, insulation, hybrid systems, magnets, temperature distribution
Ключевые слова: HTS, coils, quench detection, modeling, numerical analysis, design parameters, YBCO, experimental results, voltage waveforms, quench properties
Ключевые слова: ITER, current leads, prototype, fabrication, design, design parameters, pressure drop, HTS, Bi2223, stacked blocks, LTS, NbTi, cable-in-conduit conductor, joint resistances, insulation, solder, heat exchanger
Ключевые слова: power equipment, HTS, cables, termination, insulation, modeling, electric field distribution, breakdown characteristics
Ключевые слова: power equipment, cables, joints, feeder, bus bar conductor, welding, fabrication
Ключевые слова: ITER, current leads, HTS, design, design parameters, heat exchanger, termination, LTS, fatigue behavior, welding, joint resistances
Mitchell N., Chen Y., Devred A., Song Y., Huang X., Clayton N., Liu C., Gung C., Cheng Y., Ding K., Lu K., Shen G., Feng H., Yu X., Sato N., Niu E., Pierre B.
Ключевые слова: ITER, feeder, China, review, status, HTS, current leads, joints, thermal properties, shields
Ключевые слова: ITER, feeder, insulation, reinforcement, mechanical properties, measurement technique, stress effects, shear strength
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.